[수입판매] Pepperl + Fuchs Thru-beam sensor OBE500-R2F-SE2 포토센서

[수입판매] Pepperl + Fuchs Thru-beam sensor OBE500-R2F-SE2

• 포토센서장착 브래킷 없이 직접 장착할 수 있는 매우 평평한 디자인
• 매우 밝고 잘 보이는 광점

Product Description

Thru-beam sensor, flat design, space-saving M2 mounting, 500 mm detection range, red light, dark on, PNP output, fixed cable

System components
Emitter		OBE500-R2F-S
Receiver		OBE500-R2F-E2
General specifications
Effective detection range		0 ... 500 mm
Threshold detection range		700 mm
Light source		LED
Light type		modulated visible red light , 630 nm
LED risk group labelling		exempt group
Angle deviation		approx. 2 °
Object size		typ. starts from 1.5 mm
Diameter of the light spot		approx. 90 mm at a distance of 500 mm
Opening angle		approx. 5 °
Optical face		frontal
Ambient light limit		EN 60947-5-2 : 25000 Lux
Functional safety related parameters
MTTFd		806 a
Mission Time (TM)		20 a
Diagnostic Coverage (DC)		0 %
Indicators/operating means
Operation indicator		LED green, statically lit Power on , short-circuit : LED green flashing (approx. 4 Hz)
Function indicator		Receiver: LED yellow, lights up when light beam is free, flashes when falling short of the stability control ; OFF when light beam is interrupted
Electrical specifications
Operating voltage		10 ... 30 V DC
No-load supply current		< 10 mA
Protection class		III
Input
Test input		Test of switching function at 0 V
Output
Switching type		NO contact / dark-on
Signal output		1 PNP output, short-circuit protected, reverse polarity protected, open collector
Switching voltage		max. 30 V DC
Switching current		max. 50 mA , resistive load
Voltage drop		≤ 1.5 V DC
Switching frequency		approx. 1 kHz
Response time		500 µs

​

​

​