[수입판매] PEPPERL & FUCHS Singleturn absolute rotary encoder ASS58-K P&F 로터리 엔코더

[수입판매] PEPPERL & FUCHS Singleturn absolute rotary encoder ASS58-K P&F 로터리 엔코더

• Industrial standard housing ∅58 mm
• 16 Bit singleturn
• Data transfer up to 2 MBaud
• Optically isolated RS 422 interface
• Recessed hollow shaft
• Zero-set function electrically and by preset key

General specifications
Detection type		photoelectric sampling
Device type		Singleturn absolute rotary encoder
Indicators/operating means
LED green		supply voltage/preset key pressed
LED red		internal diagnostic test failed
Electrical specifications
Operating voltage		4.5 ... 30 V DC
Power consumption		≤ 1 W
Time delay before availability		< 250 ms
Linearity		± 2 LSB at 16 Bit, ± 1 LSB at 13 Bit, ± 0,5 LSB at 12 Bit
Output code		Gray code, binary code
Code course (counting direction)		cw descending (clockwise rotation, code course descending)
Interface
Interface type		SSI
Monoflop time		20 ± 10 µs
Resolution
	Single turn	up to 16 Bit
	Overall resolution	up to 16 Bit
Transfer rate		0.1 ... 2 MBit/s
Voltage drop		UB - 2.5 V
Standard conformity		RS 422
Input 1
Input type		Selection of counting direction (cw/ccw)
Signal voltage
	High	4.5 ... 30 V or open input (cw ascending)
	Low	0 ... 1 V (cw descending)
Input current		< 6 mA
Switch-on delay		< 10 ms
Input 2
Input type		zero-set (PRESET 1)
Signal voltage
	High	4.5 ... 30 V
	Low	0 ... 1 V or open input
Input current		< 6 mA
Signal duration		min. 100 ms
Switch-on delay		< 10 ms after falling input flank
Connection
Connector		type 9416 (M23), 12-pin, type 9416L (M23), 12-pin
Cable		∅7 mm, 6 x 2 x 0.14 mm2, 1 m
Standard conformity
Degree of protection		DIN EN 60529, IP65 (without shaft seal) ; DIN EN 60529, IP66/IP67 (with shaft seal)
Climatic testing		DIN EN 60068-2-3, no moisture condensation
Emitted interference		DIN EN 61000-6-4
Noise immunity		DIN EN 61000-6-2
Shock resistance		DIN EN 60068-2-27, 100 g, 6 ms
Vibration resistance		DIN EN 60068-2-6, 20 g, 10 ... 2000 Hz
Approvals and certificates
UL approval		cULus Listed, General Purpose, Class 2 Power Source
Ambient conditions
Operating temperature		-40 ... 85 °C (-40 ... 185 °F)
Storage temperature		-40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Material
	Combination 1	housing: powder coated aluminum flange: aluminum shaft: stainless steel
	Combination 2 (Inox)	housing: stainless steel flange: stainless steel shaft: stainless steel
Mass		approx. 460 g (combination 1) approx. 800 g (combination 2)
Rotational speed		max. 12000 min -1
Moment of inertia		≤ 30 gcm2
Starting torque		< 3 Ncm (version without shaft seal)
Shaft load
	Angle offset	± 0.9 °
	Axial offset	static: ± 0.3 mm, dynamic: ± 0.1 mm
	Radial offset	static: ± 0.5 mm, dynamic: ± 0.2 mm
Dimensions
	Length	72 mm

​

​

​